|
![[Under Construction]](images/undercon.gif)
| |

Wheel Alignment
Wheel alignment is the position of the wheels relative
to your car. When properly aligned, the wheels point in the right direction.
Without proper alignment, the wheels resist your steering commands, as well as
each other. Alignment also affects gas mileage and tire wear. If your tires are
pointed in different directions, they fight against each other and can cause
tread wear.
Computerized alignment equipment is used to measure all alignment angles on
today's cars. These include both adjustable and non-adjustable angles.
(Non-adjustable angles require repair or replacement of the suspension
component.) The most common adjustable angles are:
Toe
This refers to the tilted direction of the wheels toward or away from one
another when viewed from the top. Toe is the most critical tire wearing angle.
Tires that "toe-in" point toward one another. Tires that "toe-out" point away
from each other.
Camber
This refers to the tilt of the wheels toward or away from one another when
viewed from the front. Wheels that tilt in toward the vehicle have "negative
camber." Wheels that tilt away from the vehicle have "positive camber."
Caster
This refers to the angle of the steering axis in relation to an imaginary
vertical line through the center of the wheel when viewed from the side.
"Positive caster" is the term used when the vertical line is tilted back toward
the rear. If it's tilted forward, we call it "negative caster." The proper
caster angle stabilizes your car for better steering.
Thrust Angle
This refers to the relationship of all four wheels to each other, as well as
their relationship to an imaginary center line that runs from bumper to bumper.
The term "thrust line" refers to the direction in which the rear wheels are
pointed. Thrust angle is correctable on cars with adjustable rear suspensions.
If your car has a non-adjustable suspension, thrust angle is compensated for by
aligning the front wheels to the rear wheels
 |
|